Zone layout and head spacing done right — with a free 2-year warranty.
Sprinkler System Installation & Repair
Dry patches between heads, a water bill that keeps climbing, zones that will not come on — sprinkler problems usually trace to layout, pressure, or worn parts. We design and install new systems with correct zone layout and head spacing, and we repair existing ones: leak diagnosis, head replacement, valve and controller troubleshooting, and seasonal tune-ups. Most of the systems we are called to repair were not broken so much as badly laid out to begin with. Heads spaced past their throw leave dry rings no controller setting can fix, and zones sized past the available pressure starve the far end every cycle. We size zones to the pressure and flow the property actually has, not to a number on a page. Licensed TX irrigator LI23001, with a free 2-year warranty on every system installed. Free estimates across East Texas.
Our Process
How we approach sprinkler system installation & repair
Inspect
Site assessment: static pressure, flow rate, grade, and the condition of what is already in the ground.
Design
A plan sized to the property — zones, head spacing, pipe runs, and drainage routes.
Install
Work done to plan, at depth and to grade, with materials rated for the job.
Verify
Every zone tested and adjusted, results documented, and the system walked with you.
Signs
- ›Dry patches or brown spots between heads
- ›Water bill climbing with no change in use
- ›Heads not popping up or spraying sideways
- ›Zones that will not come on
The Work
New installs start with zone layout: we map the property, size each zone to available pressure and flow, and set head spacing for head-to-head coverage — no gaps, no overspray onto pavement. Repairs start with diagnosis: leak isolation zone by zone, head and nozzle replacement, valve and controller troubleshooting, and seasonal tune-ups. Every system we install carries a free 2-year warranty.